|
PAT iFlex5 Load Moment Indicator for Mobile Cranes |
|
.jpg) Take full control of the future with iFLEX 5 from PAT. The mobile controls from the iFLEX E (Extended Class) series are programmable controls which combine the performance of a highly integrated 32-bit microprocessor technology with compact design. Moreover, they are designed for use in rough environments, including extreme operating temperatures. The design of the plugs and housing have a protection class rating of up to IP67, EMC durability, and are shake-proof. In addition to the high level of performance, due to the 32-bit microprocessor technology, the iFLEX E controls permit a large number of inputs and outputs for digital and analog signals which enable processing functions in the sensors and actuators. The inputs and outputs can be individually configured and customized to suit the application. Proportional valves can be run directly through PWM outputs with internal current measurement without an additional amplifier. The integrated CAN bus interfaces enable the integration of intelligent sensors and actuators with CANopen. Several iFLEX E2 control units can also be linked to create a powerful decentralized network. In addition, the iFLEX E2 unit supports engine data communication as specified by SAE J1939. The iFLEX E2 mobile control unit also features internal interfaces for extension modules allowing up to 8 extra inputs and 4 outputs. The iFLEX E2 can be customized to suit your requirements at any time. Recording and permanent storage of process data is no problem – the iFLEX E series has a real-time clock and a 256 kB RAM with battery back-up. For simple fault diagnostic, the iFLEX E2 has a 7-segment display which can be viewed from the outside. Two interfaces are provided: An RS232 service interface and an Ethernet 10Base-T interface with industrial Ethernet M12 plug connector for programming. For more complex applications, the iFLEX E5 offers over 100 inputs and outputs. The iFLEX E series application software can be developed in the high-level language “C” or with a PLC programming system in accordance with IEC 61131-3.
The PAT iFlex5 LMI offers a full-range of outstanding features, including:
Measures True Load Moment:
By measuring the true load moment the PAT iFlex5 LMI senses boom dynamics, load swingout, wind loading, shock load and the effects of boom deflection. Load moment is measured in lattice boom cranes with a force transducer in the boom pendants, and in telescopic boom cranes with pressure transducers in the lift cylinders.
Graphic LCD Display and a super-twisted LCD-backlit for night operation, gives operators a clear and easy view from all angles.
Analog Indication of relative load moment information, it provides a quick, convenient way for operators to see where they are in the load chart.
Anti-Two-Block: A special hoist limit switch sounds an alarm and flashes a visual warning of an impending two-block condition.
Function Control Lever Lockout: When the LMI System senses an overload or an impending two-block condition, the DS-350GM provides a relay output which can be used to engage an optional lever lockout system to override hoist "up" telescope "out" and boom "down."
Features
- Displays actual and allowable load, boom length, boom angle, and load radius
- Alerts the operator in an impending two block condition
- Quick and easy set-up through the operator’s console
- User-friendly console
- Meets SAE and ANSI B-30.5 standards
Self-Diagnostics – Continuously monitors system and sensors. Error codes are displayed to help identify problems and minimize downtime.
The PAT iFlex5 System was initially installed by Grove Worldwide , Shady Grove, Pa the leading U.S. Crane Manufacturer, as standard equipment on mobile cranes replacing the DS-350GM beginning in 2002. This system is currently standard equipment on many Grove Cranes
|
